CHARACTERIZATION AND LOW-TEMPERATURE STABILITY OF ION-EXCHANGE RESINS

Authors

  • Safarov Gulomjon Tulagan ugli Head of the Human Resources Development and Management Department of the Kashkadarya Regional Department of the Cadastral Chamber Author

Keywords:

Keywords: ion-exchange resins; physicochemical properties; granulometric composition; mechanical strength; specific surface area; low-temperature resistance.

Abstract

 This study evaluates the physicochemical and technological properties of ion-exchange resins used in ion-exchange processes. Eight resins, including BO-020, AMP, Purolite A-606, BD-706, Tulsion A-3663, Amberlite IRA-120, Resinacs, and Dowex-1, were investigated. Granulometric composition, mechanical strength, specific surface area, density, porous structure, selectivity, regeneration properties, and resistance to low temperatures were analyzed. The results showed significant differences among the investigated resins. BO-020 demonstrated the highest quality degree (88%) and the largest specific surface area (65.00 m²/g), while AMP showed 85% and 54.00 m²/g, respectively. Low-temperature tests indicated that freezing affects mechanical strength and particle size, particularly in larger fractions. Smaller particles showed greater stability during freezing. The obtained results demonstrate the importance of comprehensive evaluation of physicochemical, mechanical, structural, and temperature-resistant properties when selecting ion-exchange resins for practical applications.

References

1.Chen, F., Lv, M., Ye, Y., Miao, S., Tang, X., Liu, Y., Liang, B., Qin, Z., Chen, Y., He, Z., & Wang, Y. (2022). Insights on uranium removal by ion exchange columns: The deactivation mechanisms and an overlooked biological pathway. Chemical Engineering Journal, 434, 134708.

2.Prusty, S., Somu, P., Sahoo, J. K., Panda, D., Sahoo, S. K., Lee, Y. R., Jarin, T., Sundar, L. S., & Rao, K. S. (2022). Adsorptive sequestration of noxious uranium(VI) from water resources: A comprehensive review. Chemosphere, 308, 136278.

3.Bai, J., Li, S., Yan, H., Jin, K., Gao, F., Zhang, C., & Wang, J. (2022). Processable amidoxime functionalized porous hyper-crosslinked polymer with highly efficient regeneration for uranium extraction. Journal of Molecular Liquids, 362, 119745.

4.Nouri-Khangah, B., Ghoddocynejad, D., Outokesh, M., & Saberyan, K. (2023). Developing a mini pilot resin-in-solution process for adsorption of uranium in Pachuca reactors: Case study of Saghand uranium ore of Central Iran. Hydrometallurgy, 222, 106198.

5.Youssef, W. M., Masoud, A. M., Elmaadawy, M. M., & Khawassek, Y. M. (2024). Uranium(VI) sorption from aqueous solution using commercial anion exchange resins: Kinetics, isotherm, and thermodynamic investigations. Journal of Radioanalytical and Nuclear Chemistry, 333, 1975–1989.

6.Naik, M.-U.-D. (2024). Adsorbents for uranium capture from seawater for a clean energy source and environmental safety: A review. ACS Omega, 9(11), 12380–12402.

7.Das, A., Jana, A., Das, D., Biswas, S., Seshadri, H., Rao, M. S., & De, S. (2024). Efficient adsorption and desorption of uranium(VI) using a polymeric adsorbent: A combined theoretical and experimental approach with real-life alkaline leach liquor. Industrial & Engineering Chemistry Research, 63(13), 5845–5862.

8.Chen, W., Wang, J., Lin, X., Ma, X., Lin, B., Dai, X., & Li, L. (2024). Uranium adsorbents based on hypercross-linked asphalt polymers via a cyanide-free strategy. ACS Applied Polymer Materials, 6(9), 5394–5403.

9.Alnaief, M., Al-Shannag, M., Aljarrah, M., Funari Junior, R. A., Silva, L. F. O., Silva, M. L. O., & Dotto, G. L. (2025). Uranium recovery from real samples leached from deposits in Central Jordan using MonoPlus-M-800 commercial resin: A deep adsorption study. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 724, 137454.

10.Wizan, A., Ghoddocynejad, D., & Davachi, S. M. (2025). Comparative analysis of uranium adsorption by Varion-AP and A500 resins in a CSTR cascade: Modeling, optimization, and mass transfer insights. Journal of Water Process Engineering, 77, 108640.

Downloads

Published

2026-10-20