DEVELOPMENT OF LIGHTWEIGHT COMPOSITE CEMENTING SLURRY FORMULATIONS BASED ON LOCAL RAW MATERIALS AND SILICA FUME AND INVESTIGATION OF THEIR RHEOLOGICAL PROPERTIES
Keywords:
Keywords: Keywords: lightweight cementing slurry; local raw materials; silica fume; microsilica; composite binder; rheology; yield stress; apparent viscosity.Abstract
Abstract. Lightweight cementing slurries are required when a cement-based mixture must remain pumpable while limiting the pressure imposed on a weak formation or substrate. This extended abstract examines the development of composite slurries using locally obtainable mineral constituents and silica fume (microsilica), with emphasis on fresh-state rheology. A literature-based assessment and a controlled laboratory screening plan are presented. The proposed variables include silica-fume replacement level, proportion of a verified low-density mineral filler, and water-to-dry-solids ratio. Slurry density, yield stress, apparent viscosity, and stability are identified as the principal evaluation criteria, supported by Bingham and Herschel–Bulkley flow models. Silica fume may benefit particle packing and hardened microstructure, although its influence on flow depends on dosage, particle characteristics, and water availability. No site-specific raw materials or trial mixes have yet been experimentally validated. Accordingly, the formulations are proposed for future testing rather than reported as confirmed results.
References
1.Tao, C., Kutchko, B. G., Rosenbaum, E., & Massoudi, M. (2020). A review of rheological modeling of cement slurry in oil well applications. Energies, 13(3), 570. https://doi.org/10.3390/en13030570
2.Adjei, S., & Elkatatny, S. (2021). Overview of the lightweight oil-well cement mechanical properties for shallow wells. Journal of Petroleum Science and Engineering, 198, 108201. https://doi.org/10.1016/j.petrol.2020.108201
3.Zhang, C., et al. (2023). Rheological properties of cement-based slurry and evaluation of rheological model: Influence of particle size and shape. Construction and Building Materials, 406, 133498. https://doi.org/10.1016/j.conbuildmat.2023.133498
4.Cai, C., et al. (2023). Rheological behaviour, setting time, compressive strength and microstructure of mortar incorporating supplementary cementitious materials and nano-silica. RSC Advances, 13, 17264–17281. https://doi.org/10.1039/D3RA02635C
5.Zheng, S., et al. (2022). Experimental investigation on the effect of nano silica fume on physical properties and microstructural characteristics of lightweight cement slurry. Construction and Building Materials, 329, 127172. https://doi.org/10.1016/j.conbuildmat.2022.127172
6.Mahmoud, A. A., & Elkatatny, S. (2024). Properties and performance of oil well slurry and cement sheath incorporating nano silica: A review. ACS Omega, 9(8), 8654–8665. https://doi.org/10.1021/acsomega.3c07365
7.ASTM International. (2020). ASTM C1240-20: Standard specification for silica fume used in cementitious mixtures. https://doi.org/10.1520/C1240-20
8.International Organization for Standardization. (2003, confirmed 2024). ISO 10426-2:2003: Petroleum and natural gas industries—Cements and materials for well cementing—Part 2: Testing of well cements. https://www.iso.org/standard/37866.html